Detail Polypropylene Filter Cartridge 3 Micron
Polypropylene Filter Cartridge 3 micron PT.PROFILTER INDONESIA Quick Response + 6281385066789 Email : sales@ profilterindonesia.com String Wound & Melt Blown Filter Cartridge Polypropylene
Polypropylene Filter Cartridge
Melt Blown Polypropylene Filter Cartridge
The PFI PP Melt Blown Filter Cartridge
The PP Melt Blown Filter Cartridge is fusing and intertwined of polypropylene resin without any chemical glues.The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong pollutants holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.
Features
Three layers structure cartridge offers high dirt holding capacity, longerservice life
Formed by thermal bond without using any binders and adhesives.
100% Pure Polypropylene will not cause any pollution to water
Wide Chemical compatibility
Groove design to extend the filtration surface area.
All kinds of adaptors are available.
Applications
Drinking Water Treatment
Electronic
Industrial Water Treatment
Plating
Chemicals, solvents
Specifications
Dimensions:
Outside Diameter: 63mm, 115mm
Inside Diameter: 28mm & 30 mm
Length: 10? , 20? , 30? , 40?
Material of Construction:
Filter media: Polypropylene
End caps: Polypropylene
Cores: Polypropylene ( PFI PPC )
Gaskets/ O-ring: Silicone, EPDM, NBR, Viton, Teflon
Performance Specification:
Micron Rating: 1, 2, 3, 5, 10, 20, 25, 30, 50, 75, 100 until 200 Micron
Maximum Differential Pressure: 2.0 bar @ 21oC
Maximum Operating Temperature: 65-90 oC
Flow Rate vs. Differential Pressure
Differential Pressure ( bar)
Flow Rate ( GPM) , water 20 oC
PFI cartridges are available with Polypropylene, or Cotton materials wound onto Polypropylene, 304 stainless steel or tinned steel cores. The cartridges can be used ( in one combination of materials or another) in most areas where chemical compatibility is of concern. Special materials are available for high temperature or unusually aggressive applications. Food grade product ( FDA PP Fibre) is always available ex-stock. Activated carbon cartridges are available to remove unpleasant tastes and odors.
Polypropylene Filter Cartridge 3 micron
PFI FILTER CORE SELECTION GUIDE
Polypropylene: economical core of choice for most applications in water and corrosives to 200 F.
Tin Plated Steel: General purpose metal core for oils, solvents, paints, and other non-FDA applications. For use to 400 F.
304 Stainless Steel: For high temperature applications on diluted acids and moderately corrosive fluids. For use to 750 F.
316 Stainless Steel: For high temperature applications on strong acids and highly corrosive fluids. For use to 750 F.
Glass-filled nylon for strong acids and highly corrosive fluids when polypropylene is not compatible.
PFI-PP Standard Polypropylene String Wound
For concentrated acids and alkalies, strong oxidizing agents, and corrosive fluids and gases. Easily incinerated to trace ash. For use to 200 F
PFI-PD FDA Grade Polypropylene String Wound
Ideally suited for potable water, Pharmaceutical and Food Processing Applications.
PFI-NC Natural Cotton String Wound
For oils, water, paints, organic solvents, alcohols, and petroleum. Non-FDA applications. For use to 300 F.
PFI-BC Bleached Cotton String Wound
Bleached to meet FDA standards for distilled water, beverages, vegetable oils, petroleum, fatty acids, and alcohols. For use to 300 F. FDA approved.
PFI-FG Fiberglass String Wound
Available in both standard and baked media. Baking removes all traces of oil sizing, yielding virgin glass fiber. For use to 750 F.
Polypropylene Filter Cartridge 3 micron
Tampilkan Lebih Banyak