Aquafine CSL-6R UV Sterilizer 60 GPM

Aquafine CSL-6R PT.PROFILTER INDONESIA Phone + 6221 84937329, 0818807696 Email : sales@ profilterindonesia.com Aquafine CSL Series The CSL series is a compact, totally enclosed unit, which incorporates a UV treatment chamber with an electrical cabinet base containing all electrical components and instrumentation.These one-piece UV models are engineered for indoor installations and controlled operating environments. The CSL series is used in laboratory, hospital and hotel installations, as well as cosmetic, pharmaceutical and semiconductor manufacturing processes. Stainless baffles are included in the treatment chamber to induce turbulence and prevent channeling, maximizing the exposure toultraviolet radiation. Product Description Weight ( lbs) : 120 Total Amps.: 3.2 Total Watts: 396Standard Features: 99% Plus Bacterial Reduction Operating Pressure - 120 psig Chamber - 316 Stainless Steel Chamber - Passivated and Electropolished Integral Ballast Enclosure: 304 Stainless Steel LED UV Lamp Operating Display Panel Running Time Meter: 99, 999 Hours. - Non resettable Socket Lok™ Mating flanges are NOT supplied with units. Standard water temperature range 35 degrees F to 100 degrees F ( 2 degrees C to 38 degrees C) Socket Lok™ is a registerd trademark of Aquafine Corporation. Aquafine CSL-6R UV Sterilizer 60 GPM Optional Features S-254 UV Optical Sensor T-120 Temperature Safety Control High Water Temperature Models High Pressure Models ( to 150 PSIG) Sanitary Fittings Lamp Out Alert Optional Monitoring Package ( See Details Below) Optional Monitoring Package Details: An integrated NIST traceable ( optional) UV and temperature monitoring systemwill accurately monitor UV intensity and process water temperature of yourexisting UV treatment equipment from Aquafine. The new design improvesreliability and performance accuracy in one state-of-the-art monitoring technologysystem. Component cost savings and improved liability protection will be some ofthe key benefits you will have with this state-of-the-art monitoring system. Thedetector employs a Gallium Nitride ( GaN) photodiode and a semiconductortemperature sensor in a single package, along with its on-board electronics forremote and local operation features: Detector: UV and temperature sensors in a single housing Optional NIST-traceable UV sensor calibration with certificate upon request No optical filters, no degradation Withstands non-operating temperatures of 250° F 121° C for steam sterilization at a maximum pressure of 250psi ( 17.2 bar) Complete on-board electronics for UV and temperature Absolute and percent UV readout options Detector Cable: Water-resistant axial connector and cabling No diffuser, therefore no UV solarization Temperature sensor and controller does not require calibration Detector can be used for UV Monitoring Station and Aqualogic 2000™ system. Aquafine CSL-6R UV Sterilizer 60 GPM